Information Service:

sales5@bebonchina.com

DH32

LR, ABS, NK, GL, DNV, BV, KR, RINA, CCS, DH32 Shipbuilding steel plate

Capable Classification Society Quality Authentication from LR, ABS, NK, GL, DNV, BV, KR, RINA, CCS,ASTM A131 DH32 shipbuilding steelis not only the high tensile strength steel but also is the Hull structural steel.DH32shipbuilding steelhas good toughness properties, higher strength,strong corrosion-resistance,the processing properties,and good welding properties.Shipbuilding steel grade DH32is used for shipbuilding and oil platform purpose and they are approved by ABS,DNV,GL,BV,LR,NK,RINA and other classification societies.What's more,DH32shipbuilding steel plate can be used in manufacturing the ship's hull structure whose weight is below 10000 tons.

DH32Shipbuilding steel plate specification:
Thickness: 4mm to 260mm,
Width: 1200mm to 4000mm
Length: 3000mm to 18000mm.

DH32 shipbuilding steel plateChemical Composition %


Grade

C max

Si max

Mn

P max

S max

Als min

Ti max

Cu max

Cr
max

Ni
max

Mo
max

DH32

0.18

0.50

0.90-1.60

0.035

0.035

0.015

0.02

0.35

0.20

0.40

0.08

Note: Generally speaking CE will be 0.40%. If the delivery condition is TMPC, the CE will be : 0.36% (thickness 50mm),.38%( when the thickness >50-100). Ceq% =(C+Mn)/6+(Cr+Mo+V)/5+(Ni+Cu)/15.

DH32 shipbuilding steel plateMechanicaL Property


Grade

Rm
(MPa)

Re(MPa) min

A% min

Akv/J min

DH32

440-570

315

22

E.T C

Thickness (mm)

-20

50

>50-70

>70-100

L

C

L

C

L

C

31

22

38

26

46

31

Note: In the list , Rm:.tensile strength,Re: Yield strength,A%: elongation, E.T: experimental temperature,L: lengthways, C: crosswise.

DH32shipbuilding steel plate Condition Of Delivery


Grade

Fine grains elements

category

The thickness of steel

12

>12.5-20

>20-25

>25-35

>35-50

>50-100

DH32

Nb+V or V

Plate/
sheet

A(50)

N(50),CR(50),TM(50)

N(50),CR(25),TM(50)

Profile steel

N(50),CR(50),TM(50),AR*(25)

-

Al or Al+Ti

Plate/
sheet

A(50)

AR*(25)

-

N(50),CR(50),TM(50)

N(50),CR(25),TM(50)

Profile steel

A(50)

N(50),CR(50),TM(50),AR*(25)

-

Note: 1. delivery condition: A =Any ; N=Normalized ; CR=Control Rolled ; TM=TMPC, Temperature - deformation control rolling; AR*= Can be hot rolled with the agreement of Classification Society ; CR*=Can be control rolled with the agreement of Classification Society .
2. The Figure in the ( ) means the sampling volume to do the impact test, the unit is Ton.(-) means without impact test.

DH32shipbuilding steel plate Contrast in the different standard


ASTM A131M

TOCT 5521

JIS G3106

BS LR

GB712

DH32

D32

SM490B
SM490C

DH32

D32


DH32shipbuilding steel plate Available Specification


variety
Thickness (mm) Width (mm) Longth/ inner diameter (mm)
Shipbuilidng plate cutting edges 6~200 1500~3000 3000~15000
non- cutting edges 1300~3000
Shipbuilidng coil cutting edges 1.2~19 1500~2000 760+20~760-70
non-cutting edges 1510~2010

DH32shipbuilding steel plate theoretical weight


Thickness (mm)
theoretical weight Thickness (mm) theoretical weight
Kg/ft2 Kg/m2 Kg/ ft2 Kg/m2
6 4.376 47.10 25 18.962 196.25
7 5.105 54.95 26 20.420 204.10
8 5.834 62.80 28 21.879 219.80
10 7.293 78.50 30 23.337 235.50
11 8.751 86.35 32 25.525 251.20
12 10.21 94.20 34 26.254 266.90
14 10.939 109.90 35 27.713 274.75
16 11.669 125.60 40 29.172 314.00
18 13.127 141.30 45 32.818 353.25
20 14.586 157.00 48 35.006 376.80
22 16.044 172.70 50 36.464 392.50
24 18.232 188.40

DH32shipbuilding steel plate dimensional deviation


nominal thickness
The thickness deviation with following width (mm)
>200 >1200~1500 >1500~1800 >1800
>6.0~8.0 0.29 0.30 0.31 0.35
>8.0~10.0 0.32 0.33 0.34 0.35
>10.0~12.0 0.35 0.36 0.37 0.43

nominal thickness

minus deviation (mm) The thickness deviation with following width (mm)
> 1000 ~1200 > 1200 ~1500 > 1500 ~1700 > 1700 ~1800 > 1800 ~2000 > 2000 ~2300 > 2300 ~2500 > 2500 ~2600 2600 ~2800 > 2800 ~3000
>12~25 -0.8 +0.2 +0.2 +0.3 +0.4 +0.6 +0.8 +0.8 +1.0 +1.1 +1.2
>25~30 -0.9 +0.2 +0.2 +0.3 +0.4 +0.6 +0.8 +0.9 +1.0 +1.1 +1.2
>30~34 -1.0 +0.2 +0.3 +0.3 +0.4 +0.6 +0.8 +0.9 +1.0 +1.2 +1.3
>34~40 -1.1 +0.3 +0.4 +0.5 +0.6 +0.7 +0.9 +1.0 +1.1 +1.3 +1.4
>40~45 -1.2 +0.4 +0.5 +0.6 +0.7 +0.8 +1.0 +1.1 +1.2 +1.4 +1.5